WSM 315G

Product Category ：TIG/WS/WSMWSME Welder

The size of the molten pool can be precisely controlled by pulse current, and uniform penetration can be easily obtained. It is suitable for all-position welding and single-sided welding and double-sided forming, especially for thin plate welding. Suitable for welding difficult-to-weld metal materials. The pulse current has an obvious “stirring” effect on the point-shaped molten pool, and the metal in the molten pool condenses quickly and has little impact on high temperature, thus making the weld structure fine and dense, which can reduce the impact of cracks during welding of heat-sensitive metals.

Project name		Unit	Model
Project name		Unit	WSE-315LD
Input power		V/Hz	3-380±15% 50/60
Rated input capacity		KVA	12.9
Rated input current		A	19.6
Rated output current		A	315
Rated output voltage		V	22.6
Rated no-load voltage		V	70
Rated duty cycle		–	30%(40℃)
Efficiency		–	73%
Power factor		–	0.76
Arcing current adjustment range	AC	A	20-315
Arcing current adjustment range	DC	A	10-315
Welding current adjustment range	AC	A	20-315
Welding current adjustment range	DC	A	10-315
Peak current adjustment range	AC	A	20-315
Peak current adjustment range	DC	A	10-315
Adjustment range of base current	AC	A	20-315
Adjustment range of base current	DC	A	10-315
Arcing current adjustment range	AC	A	20-315
Arcing current adjustment range	DC	A	10-315
Pulse frequency adjustment range		Hz	0.2-99.9
Pulse duty cycle adjustment range		%	10%-90%
AC frequency regulation range		Hz	20-100
Cleaning width adjustment range		–	-40~40
Regulating range of current ramping times		S	0.0-10.0
Adjustment range of current ramp down time		S	0.0-10.0
Regulating range of pre-gas time		S	0.0-20.0
Adjustment range of delay gas cut-off time		S	0.0-20
Overall dimension (L * W * H)		mm	635290555
Net weight of power supply		kg	38